Industrial Ro System
General Discription
Industrial Reverse Osmosis (RO) Systems are high-performance water purification solutions designed for large-scale applications across various industries. These systems use a semi-permeable membrane to remove salts, minerals, organic matter, and other impurities from feed water, producing clean, safe, and high-quality permeate for use in industrial processes.
At Aquatech Plus Private Limited, we design and manAPUFacture robust, energy-efficient RO systems customized for industrial use under stringent quality and performance standards.
Industrial Ro System
Standard Features
- Every Aquatech Plus Industrial RO System is built with premium components and robust engineering to ensure long-lasting performance, efficiency, and reliability.
🌟 Feature Description |
Programmable time delay and pressure setpoints |
Stainless steel multi-stage high-pressure pump with TEFC motor |
FRP membrane housings (corrosion-resistant) |
8″ TFC spiral-wound RO membranes |
5-micron cartridge pre-filter |
Powder-coated carbon steel skid frame |
Microprocessor-based control panel |
NEMA 12 rated electrical enclosure |
Low pressure FMSWitch (pump protection) |
High pressure FMSWitch (overpressure protection) |
Liquid-filled inlet and outlet pressure gauges |
Permeate conductivity monitor |
Permeate and concentrate flow meters |
Automatic hourly membrane flush |
Motor starter |
Electrical input: 460V / 3Ph / 60Hz |
Parameter | Specification |
Max. Feed Water Temperature | 42°C |
Feed Water TDS Range | 0–1,000 ppm (Standard), 3,000 ppm / 5,000 ppm (with equipment upgrade) |
Operating Pressure | 150 – 250 psi (10 – 17.2 bar) |
Feed Water Pressure (Inlet) | 20 – 80 psi (1.4 – 5.5 bar) |
pH Tolerance Range | 3 – 11 (continuous) |
Max. Silica Tolerance | 60 ppm @ 60{7b18a7080630502dff9462090639c38ac022b53b5ec422b3d0a545a26e2246ad} recovery |
Max. Iron Content | ≤ 0.05 ppm (requires pre-treatment if exceeded) |
Max. Hydrogen Sulfide (H₂S) | Must be removed before RO system (H₂S not tolerated) |
Turbidity | Must be removed using pre-filtration (sand/multimedia filters) |
Hardness Limit | >1 GPG (17.1 ppm) requires antiscalant dosing |
Recovery Rate | 50{7b18a7080630502dff9462090639c38ac022b53b5ec422b3d0a545a26e2246ad} – 75{7b18a7080630502dff9462090639c38ac022b53b5ec422b3d0a545a26e2246ad} depending on TDS and system design |
High TDS Operation Note | Operate at higher TDS by reducing recovery to prevent membrane fouling |
TDS Above 5,000 ppm | Requires customized high-pressure RO systems (consult factory) |
Model Number Notes
- If TDS > 1,000 ppm, model prefix becomes FMBW-XXXF.
- Add sAPUFfix:
- “-3” for TDS up to 3,000 ppm
- “-5” for TDS up to 5,000 ppm
Example: APFMBW-18F → FMBW-18F-5 for 5,000 ppm feed water TD
Available Optional Features
- We offer a wide range of customizable features to suit specific water quality, automation level, and process integration requirements.
⚙️ Optional Add-ons |
Feed/Permeate blending valve system |
UV sterilization system |
Water softeners for hardness control |
Feed water conductivity monitor |
Feed water or product pH monitor with sensor |
Feed ORP monitor with sensor |
Integrated chemical dosing systems (antiscalant, chlorine, SMBS, pH) |
Media pre-filtration systems (sand, carbon, iron) |
Post-treatment deionization polishers |
Skid-mounted with pre or post treatment modules |
Membrane cleaning skid (CIP system) |
Remote monitoring / SCADA-ready communication |
Product tank level controller with auto-start/stop |
Alternate power configurations: |
• 220V / 3Ph / 50Hz |
• 380–415V / 3Ph / 50Hz |
Applications
Industrial RO systems are ideal for:
- 🧪 Pharmaceutical & Chemical Industries
- 🏭 Boiler Feed & Cooling Tower Makeup Water
- 🧴 Food & Beverage Production
- 🧼 Textile Dyeing & Finishing Units
- 🔬 Electronics & Semiconductor ManAPUFacturing
- 🛢 Petrochemical & Refineries
- 🏢 Hotels, Commercial Complexes & Hospitals
- 🚿 Packaged Drinking Water Plants (IS 14543/13428)
- 🛠 Automobile & Metal Finishing
- 🌾Agro & Dairy Applications
Industrial RO Model Specification Table – APFMBW Series
Model No. | Permeate Flow (GPD) | Flow (m³/d) | Flow (m³/hr) | Qty. of 8″ Membranes | Motor HP (60Hz) | Motor HP (50Hz) | Weight (kg) | Dimensions (LxWxH in inches) |
APFMBW-4F | 28,000 | 106 | 4.00 | 4 | 7.5 | 5 | 1,043 | 190 x 43 x 61 |
APFMBW-5F | 36,000 | 136 | 5.68 | 5 | 7.5 | 5 | 1,066 | 230 x 43 x 61 |
APFMBW-6F | 43,000 | 163 | 6.78 | 6 | 7.5 | 7 | 1,089 | 270 x 43 x 61 |
APFMBW-8F | 57,000 | 216 | 8.99 | 8 | 7.5 | 7 | 1,134 | 190 x 43 x 63 |
APFMBW-10F | 72,000 | 273 | 11.36 | 10 | 15 | 10 | 1,179 | 230 x 43 x 65 |
APFMBW-12F | 87,000 | 329 | 13.74 | 12 | 15 | 15 | 1,225 | 190 x 43 x 75 |
APFMBW-15F | 108,000 | 409 | 17.03 | 15 | 15 | 15 | 1,451 | 230 x 43 x 75 |
APFMBW-18F | 130,000 | 492 | 20.51 | 18 | 20 | 15 | 1,588 | 270 x 53 x 77 |
APFMBW-20F | 144,000 | 545 | 22.73 | 20 | 20 | 20 | 1,905 | 230 x 53 x 87 |
APFMBW-24F | 173,000 | 655 | 27.30 | 24 | 20 | 25 | 2,064 | 270 x 53 x 88 |